Electric Panels

We offer Motor Control Center, a device that is used to control and actualize the performance of electric motors. These are made available to you in a wide variety. They are fully drawn out with incoming and outgoing feeders. MCC are offered upto 1600 Amp at 40 degrees centigrade. These control centers can be single or double design and also floor mounted design. For 50 KA short circuits it has a withstand capacity and IP: 52 degrees of protection. As per IS: 8623, form IV of separation is maintained.

They are equipped with an automatic and manual means of starting and stopping. Types of starters include Automatic Star Delta, Direct On-line, Soft Starters, Variable Frequency Drives, Stator Rotor Starters and Auto Transformer Starters. They are used a lot for reducing start voltage, reversing control or varying the speed as per the need and to protect against overloads and other faults.

We specialize in the manufacture of an impressive range of Power control centers. Our entire range is fabricated in accordance with the industry standards. They are being designed and manufactured upto 4000A rating. These are suitable in operating in a voltage of 415 V in a 3 phase 4 wire distribution systems with an insulation voltage upto 660V at an ambient Temperature of 40 degree Celsius.

As per IS: 8623, form IV of separation is maintained. For 50 KA short circuit it has a withstand capacity and IP: 52 degrees of protection. Both of these parameters are type tested. The switchboards offered are in Fixed and semi draw-out type configuration with single front design however they can also be customized to meet the demands of the customers.

We are proud manufacturers of world class distribution boards. This is an integral part of the electricity supply system which feeds an electric power feed to the subsidiary circuits. At the same time it provides a protective fuse or a circuit breaker for each circuit in a common enclosure. These are usually applied as bypass equipments.

These are designed to save a lot of electricity wastage and hence proved to be effective as well as cost effective. They are very flexible in their usage and application. Most of all they come with internally set integrated safety measures.